Expert Answers about Land Rover Discovery

• Trailer Brake Controller Wiring Instructions for a 2003 Land Rover Discovery II
• If your Land Rover came equipped with a factory installed tow package, you can choose a brake controller, like the P3 brake controller, # 90195, and then contact your dealer about where and how it would connect under the dash. If you don't have the tow package, you would need the controller and the Electric Brake Controller Installation Kit, # ETBC7, along with a working 4-way connector, # 119178KIT if needed, at the rear of your Discovery. We have detailed instructions, see link, for...
  view full answer...


• What do I Need to Install a Brake Controller on my 2020 Land Rover Discovery
• The Curt Spectrum Trailer Brake Controller part # C51170 can be installed on your 2020 Land Rover Discovery. You will need the Universal Installation Kit for Trailer Brake Controller part # ETBC7 and the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit part # 119250KIT. This will give you the 4-way flat you need to start then allow you to add on the 7-way connector needed to allow for the brake signal wire. The ETBC7 kit also has the wiring...
  view full answer...